#### Steam at a pressure of 5 bar passes into a tank containing water where it gets condensed. The mass and temperature in the tank before the admission of steam are 50 kg and 20°C respectively. Calculate the dryness fraction of steam as it enters the tank if 3 kg of steam gets condensed and resulting temperature of the mixture becomes 40°C. Take water equivalent of tank as 1.5 kg.

Steam at a pressure of 5 bar passes into a tank containing water where it gets condensed. The mass and temperature in the tank before the admission of steam are 50 kg and 20°C respectively. Calculate the dryness fraction of steam as it enters the tank if 3 kg of steam gets condensed and resulting temperature of the mixture becomes 40°C. Take water equivalent of tank as 1.5 kg.

1. Find the entropy of 1 kg of superheated steam at a pressure of 12 bar and a temperature of 250°C. Take specific heat of superheated steam as 2.1 kJ/kg K.

2. A piston-cylinder contains 3 kg of wet steam at 1.4 bar. The initial volume is 2.25 m^{3}. The steam is heated until its temperature reaches 400°C . The piston is free to moue up or down unless it reaches the stops at the top. When the piston is up against the stops the cylinder volume is 4.65 m^{3}. Determine the amount of work and heat transfer to or from steam.

3. Steam at a pressure of 5 bar passes into a tank containing water where it gets condensed. The mass and temperature in the tank before the admission of steam are 50 kg and 20°C respectively. Calculate the dryness fraction of steam as it enters the tank if 3 kg of steam gets condensed and resulting temperature of the mixture becomes 40°C. Take water equivalent of tank as 1.5 kg. #pressure of 5 bar

4. Steam at a pressure of 1.1 bar and 0.95 dry is passed into a tank containing 90 kg of water at 25°C. The mass of tank is 12.5 kg and specific heat of metal is 0.42 kJ/kg K. If the temperature of water rises to 40°C after the passage of the steam, determine the mass of steam condensed. Neglect radiation and other losses.

5. A throttling calorimeter is used to measure the dryness fraction of the steam in the steam main which has steam flowing at a pressure of 8 bar. The steam after passing through the calorimeter is at 1 bar pressure and 115°C. Calculate the dryness fraction of the steam in the main. Take c_{ps} = 2.1 kJ/kg K.

IMO website link click here